When you are out on the tracks, you only have a handful of choices when your vehicles battery runs out of juice and you are on your own, you can call a mate, you can walk home which doesn’t sound that fantastic when you are miles from anywhere or you can reach for your Adventure Kings Jump Starter.

This epic mini power pack uses extremely smart Lithium Ion technology to deliver up to 800A of high power energy offering you enough grunt to turn over even massive displacement V8 diesel engines with ease!

Measuring only 190.5mm x 82.5mm x 34mm it can easily stash underneath your car seat, in your glovebox or even neatly in the back of your Titan Rear Drawers ready for when you need it the most!

The Adventure Kings Jump Starter uses clever technology inside, which not only allows it to crank out HUGE amounts of power to start your car but it also provides a convenient and easy to use battery pack that can charge up your USB devices as well as laptops and cameras safely and quickly with 12v, 16v, 19v power options and twin 2A 5v USB Sockets!

Simply chuck your Adventure Kings Jump Starter on your battery terminals using the smart clips which protect both your car battery and the Jump starter from, reverse polarity protection, short circuit protection and reverse charging protection, the Adventure Kings Jump Starter is safe and easy to use for anyone!

The Adventure Kings Jump Starter offers 4WDs plenty of emergency charge, whilst also featuring an inbuilt LED Torch that is bright enough to light up underneath your bonnet, perfect for finding your battery and terminals when you strike a bit of trouble after dark!

Neat and compact the device and all the accessories fit easily inside the included zip up carry case keeping it clean and tidy no matter how dusty the tracks get!

[embedyt] https://www.youtube.com/watch?v=w85uM9dnljw[/embedyt]

How to Jump start your vehicle

Ensure the jump starter’s power level is not lower than 50% charged. If it is below 50%

you may not be able to jump start the vehicle.

1. Slide the power switch to the ‘on’ position and press the round power button.
2. Connect the jumper leads to your jump starter, check the blue plug tightly connects  with the jump starter.

3. Connect the RED (positive) clamp to the vehicle’s positive ( + ) terminal and connect  the BLACK (negative) clamp to the vehicle’s negative ( – ) terminal.

4. Start the vehicle.
5. Once the vehicle has started, disconnect the jump starter from the battery as soon as possible.

6. Turn the jump starter’s power switch to the ‘off’ position.

Charging USB powered devices

Note: Ensure the on/ off switch is in the ‘on’ position.

1. Use either the provided or your own USB charging cable.
2. Connect the cable to either ‘OUT 1’ or OUT 2’, connect the other end to your device.

If you are using the provided USD charging lead ensure you select the correct

connection for your device.

DO NOT charge more than 1 device at a time with the provided USB break out

charging cable.

DO USE both USB outlets at the same time if required.

3. Press the power button on the jump starter unit to begin charging your device.

Safely charging laptops

Note: Ensure the on/ off switch is in the ‘on’ position.

1. Select the suitable charging plug and connect it to the short laptop charging cable provided.

2. Press the round power button to select the correct voltage suitable for your laptop. This will either be 12/16/19 volts. Voltage is shown on the bottom right corner of the

LCD screen.

3. Once the correct voltage is selected, connect the laptop charging cable to the jump starter and then to your laptop.

4. If you need to reselect the voltage, turn the unit off and then back on.

NOTE: Warranty does not cover any loss associated with improper use. Please ensure you

check the rated voltage of your device before charging from the 12/16/19V port.

USING THE LED TORCH

Note: Ensure the on/ off switch is in the ‘on’ position.

1. Press and hold the round power button for 3 seconds. The LED torch will then turn on.
2. Press the round button again to activate the strobe function.
3. Press the round button again to activate the SOS function.

With all of this functionality the real question is why you haven’t bought one yet?! Come in to one of our fully equipped showrooms to find out more about