Seen all over Oz, the Adventure Kings range of awnings offer fully UPF50+ rated, 100% waterproof, 170GSM ripstop polyester shelter suitable for withstanding rain, hail or sunshine.

Performance per dollar you simply cannot beat an Adventure Kings Premium Awning for value for money. They set up in just seconds and offer the perfect shelter from the elements plus they pack up just as fast so you’re ready to hit the tracks first thing in the morning.

Built to withstand anything the rugged Aussie conditions can throw at them all Adventure Kings Awnings feature anodized telescopic alloy poles, cast alloy (not plastic) knuckles and a durable yet lightweight 170gsm ripstop polyester. The entire assembly packs away into its purpose built, heavy duty nylon reinforced PVC bag which is built into the mounting foundation which has a universal design to suit virtually any vehicle on the market.

[embedyt] https://www.youtube.com/watch?v=wakEtT4SZmo[/embedyt]

Unlike other awnings on the market, Adventure Kings Awnings use a dual channel system, which makes folding up the awning poles, and packing away the entire awning, extremely quick and easy. Simply set the poles to a suitable height and both can be folded in to pack them away, no need to completely readjust every time you use it which makes it very quick, very easy and very simple to set up!

Fitting Instructions It is important when mounting the awning to ensure that all the ‘L’ mounting brackets supplied are spaced far enough apart to adequately support the weight of the awning. Remember when you are positioning the awning to allow sufficient clearance for the vehicle doors to open.

INSTALLATION OPTIONS!

OPTION 1 – MOUNTING DIRECTLY TO A ROOF RACK

1. Slide the small bolts into the mounting rail of the awning, as seen in the picture to the right.
2. With help from another person, hold the awning in place and mark the mounting holes for the awning. It is best to have the mounting bolts as far apart as possible.
3. Carefully drill the holes into the roof rack.
4. Align awning into desired position and tighten the nuts.
5. Re-check all nuts and bolts periodically

OPTION 2 – CLAMP TO THE ROOF RACK

1. Supplied in the mounting kit are two extra (three if Adventure Kings Awnings 4 Fitting Instructions cont.

OPTION 3 – MOUNTING DIRECTLY TO ROOF CROSS BAR

1. Ensure that the roof bars are of enough distance apart to provide sufficient support for the awning.
2. Align the long side of the “L” shaped brackets on to the roof bars as seen to the right, with the brackets in suitable position to allow easy access to the awning, without it protruding to far from the side of the vehicle.
3. Mark the holes and centre punch.
4. Drill the holes to clear the long bolts.
5. Bolt the “L” shaped brackets to the roof bars.
6. Slide the head of the small bolts into the mounting rail of the awning.
7. With help from another person, position the awning onto the “L” shaped brackets and install the nylon nuts.
8. Align awning into desired position and tighten all nuts and bolts.
9. Re-check all nuts and bolts periodically.

[embedyt] https://www.youtube.com/watch?v=htFnQJIunLg[/embedyt]

Adventure Kings Awnings Setup Procedure

1. Undo the zipper on the protective bag and whilst holding the awning in place, release the captive buckles.
2. Flip the awning over the top of the cover, this will now allow you to easily swing out the horizontal poles past 90°. Once you have pulled the horizontal poles out extend them out as far as possible and twist to lock into place.
3. Holding the awning in your hands, unroll it to its full length, taking care as you get to the end as the 2 Vertical poles may have come loose during travel.
4. Carefully release the legs from inside the channel, and with one hand holding the centre of the awning, set each leg to the desired height and twist the bottom half of the leg to lock.
5. Whilst holding the awning end beam with one arm, align the end pin on one of the horizontal legs with the hole in the end beam. Twist the leg to lock in position. Repeat on the other horizontal leg.
6. Fix the awning material to the horizontal arms using the Velcro straps.
7. Using the pegs and guy ropes secure the awning front beam diagonally outwards to secure the legs.

[embedyt] https://www.youtube.com/watch?v=KrK-GpoXCrA[/embedyt]

NOTE: The pegs supplied are designed to be used in hard soil. A different peg design and size may be required to secure your awning depending on the type of terrain you are anchoring it to.

8. Pack away is a reverse of steps 1-7. Be sure to roll the awning material underneath itself. Avoid packing away the awning wet, if the awning has been stored wet, open it at a more convenient time to allow it to dry.